Configure Your Build
Every custom system is spec’d with you. Here are the choices we walk through — bring a sound clip and we’ll dial in the rest.
True dual — one muffler & tip per side
Single — both sides merge into one muffler & exit
Cat-Back
Custom BuiltFrom the catalytic converter back — the full system for the biggest change in sound, flow, and looks.
- Exit Configuration
Single exit or dual exit — we build it either way.
- Exit Location
Where the tips come out: rear, side-exit before the tire, or corner. Your call.
- Mufflers
Pick the muffler(s) and target tone — mellow to aggressive — or no mufflers at all.
- X-Pipe or H-Pipe
Add a crossover to fine-tune tone and scavenging: X-pipe for a raspier high-end, H-pipe for a classic deep rumble.
- Exhaust Cutouts
Add electric QTP cutouts for the best of both worlds — quiet and street-legal on the daily, then open them up for full-volume, uncorked flow at the flip of a switch.
- Pipe Size
Sized to your build — 2.25", 2.5", 3", or 3.5" to match your power goals.
Axle-Back
Custom BuiltFrom the rear axle back — a simpler, budget-friendly swap that still transforms sound and appearance.
- Exit Configuration
Single exit or dual exit off the rear.
- Exit Location
Rear, side, or corner exit placement to match the look you want.
- Mufflers
Choose your muffler(s) for the exact tone — this is where an axle-back makes its statement.
- Pipe Size
Matched to your existing system so it bolts up clean and flows right.
Not sure which system fits your goals or budget? We'll walk you through it and quote your exact build.
How It Works
How We Get It Done Right
Inspect
We put your vehicle up and check the full system, not just the obvious part.
Diagnose
We pinpoint the real cause so you fix the problem, not the symptom.
Repair
We fix it right with quality parts matched to how you drive.
Verify
We test our work before your vehicle leaves the shop.
What We Do
Fabrication is the craft behind every custom build. We mock up the routing, bend mandrel tube for smooth flow, and lay down clean MIG welds so the finished piece looks and performs like it belongs on the car. Tight clearances, odd chassis, or a swap nobody makes parts for — that is exactly the work we like.
We also fabricate for other shops and builders who want the pipework done right. Bring us the vehicle and the vision and we will build the metal to match.
What's Included
- One-off mandrel-bent pipe fabrication
- Custom routing, clearances, and tight-fit sections
- MIG welding in aluminized or stainless steel
- Flange, bung, and hanger fabrication
- Cracked or damaged exhaust repair and re-fab
- Fabrication work for other shops and builders
Real fabrication, not off-the-shelf guesswork.
Some jobs do not have a kit. When you need a one-off pipe, a tricky routing, or a clean repair, our fabricators mock it up, bend it, and weld it to fit your vehicle exactly.
Need something fabricated?
Our experienced Mesa team is ready to help. Book online, call, or text and we'll take care of the rest.
Visit Us
7256 S 89th Place, Unit 109, Mesa, AZ 85212
Hours
Mon–Fri: 8:00AM – 4:00PM
Financing Available
Flexible payment options — see if you qualify